www.outdoorheaterstore.com

The Sunglo model A244 suspended heater frees your deck by supporting heaters from above.  The distinctive frame works well in a variety of decors.  Automatic control systems make these heaters easy to operate even though they may be out of easy reach.  This heater offers a large aluminum disk reflector for maximum comfort, a primary aerated burner to minimize noise, and 100% safety shutoff.  The wrought iron frame with classic metal scroll design comes in a black powder coat finish.

• Height: 41.25 inches
• Reflector Diameter: 34"
• Burner Materials: Heavy duty series 430 stainless steel
• Emitter Grid Materials: Heavy duty series 430 stainless steel
• Fasteners: Series 304 stainless steel
• Finish Colors:Black Decorative Mount with Stainless Head
• BTU Input/Hour: 50,000 BTU/Hour
• Reflector Clearances: 18" from top - 24" to the sides
• Base Diameter: N/A
• Net Weight:66 pounds (not including cylinder)
• Circle of Heat: Varies 18 feet - 20 feet (Will vary based on wind chill factor, prevailing winds, location of heater, wind protection)
• Burn Time: Constant Supply (Natural Gas)
• Gas Supply: The unit is designed for natural gas fuel with propane upon request
• Safety Systems: 100% safety shut-off, Direct Spark Igniter (DSI) or 24 Volt Control
• Product Approval: CSA Design Certified
• Installation: Installation must conform to local codes and ordinances. Please check with local fire, code, or safety officials if you have any questions as to the suitability or acceptability of this heating appliance and storage of propane cylinders.
• Warranty: One year Warranty
• * Switchable electrical supply required for 24 volt control

A244V - E Series heaters require 24 VAC electrical to be connected in order to operate.  This heater utilizes an electronic ignition and monitors the heater through flame rectification.  Heater cannot be manually lit. Heater is turned off/on with electrical switch, timer or other control device by interrupting the 24 VAC supply to the heater.  Control device to be supplied by the installer.

The required clearance from combustible materials must be maintained on all heaters.  In addition heaters must have adequate fresh air and ventilation to operate properly.  Make sure you can meet these requirements in making your heater selection.