 |
 |
 |
 |
The attractive SUNPAK heaters will increase the use and enjoyment of your outdoor dining areas. The warm red glow of radiant heat attracts people to your outdoor tables on cool days and evenings -times when your patio might otherwise be empty. The streamlined design blends in well with most any decor. SUNPAK patio heaters easily mount on outdoor walls, under ceilings and awnings and are simple to operate, inexpensive to use and easy to maintain.
- Height: 8" x 8" x 48""
- Reflector Diameter: 40" concave internal reflector
- Burner Materials: Heavy Duty series 430 stainless steel
- Emitter Grid Materials: Heavy Duty series 430 stainless steel
- Fasteners: Series 304 stainless steel
- Finish Colors: Onyx Black or Commercial Grade Stainless Steel
- BTU Input/Hour: 25,000 BTU/Hour
- Reflector Clearances: 24" from sides, 12" from rear, 9" from ceiling, 48" min. below
- Base Diameter: N/A
- Net Weight: 48 pounds
- Heating Area: 10' x 10' area (will vary based on wind chill factor, prevailing winds, location of heater, wind protection)
- Burn Time: Constant supply on Natural Gas
- Fuel Supply: This unit is designed for Natural gas or Propane upon request (must be converted by the factory)
- Safety Systems: 100% safety shut-off, optional 24 volt control
- Product Approval: CSA Design Certified
- Installation: Installation must conform to local codes and ordinances. Please check with local fire, code, or safety officials if you have any questions as to the suitability or acceptability of this heating appliance and storage of propane cylinders.
- Warranty: One year Warranty
 |  | Black
| Stainless Steel
|
Appliance Design:
SUNPAK's aluminized or stainless steel enclosure, together with the aluminum face grill, provides resistance to wind and rain. SUNPAK's slim body design (8 x 8 x 48 inches) and 0 to 30 degree angle mounting option on most models, gives SUNPAK the versatility to fit easily into a wide variety of patio situations. An optional mounting kit (Part No. 12006) is available.
Code Compliance:
The SUNPAK patio heater is design certified by the CSA International as an unvented infrared heater for outdoor or indoor installation. All units are equipped with spark ignition and 100% shutoff for safety, economy, and convenience.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Slim Profile
- Decorative Safety Grille
- Reduced Clearance Requirements
- Angle Mounting -- Zero to 30 Degrees
- Ideal for Wind Protected Areas
- Rain Protected
- 25,000 or 34,000 BTU/Hr. Input
- Natural or Propane Gas
- Direct Spark Ignition
- 100% Safety Shutoff
|
|
 |
 |
 |
 |
|
 |

|