 |
 |
 |
|
Outdoor living has never been better, and now with Infratube Quartz Radiant Outdoor Heaters, you can enjoy it year round. A low cost, energy efficient solution to heating cold outdoor areas, Infratube Radiant Heaters are ideal for patios, poolside, barbeques, gazebos, spas, garages or any place you may need spot heat.
- Height: 6" x 6" x 33"L
- Reflector Diameter: 32" concave internal reflector
- Burner Materials: All Stainless Steel Construction, Quartz Element
- Emitter Grid Materials: N/A
- Fasteners: Series 304 stainless steel
- Finish Colors:Beige or Commercial Grade Stainless Steel
- BTU Input/Hour: 5,118 BTU/Hour
- Reflector Clearances: 18" from sides, 6" from rear, 6" from ceiling, 72" min. below
- Base Diameter: N/A
- Net Weight: 12 pounds
- Heating Area: 5' x 5' area when mounted 7' high
- Burn Time: Constant supply on 120 Volt Electrical, 12.5 Amps
- Fuel Supply:Electricity only
- Safety Systems: 100% safety shut-off, Optional On/Off Heat Regulator
- Product Approval: UL Listed
- Installation: Installation must conform to local codes and ordinances. Please check with local fire, code, or safety officials if you have any questions as to the suitability or acceptability of this heating appliance and storage of propane cylinders.
- Warranty: One year Warranty
 |  | Beige
| Stainless Steel
|
The Infratube Heater incorporates a specially designed electric quartz heating element that produces safe infrared radiant energy. Radiant energy is only absorbed by solid objects and is not wasted heating the air. In addition, Infratube Heaters emit no harmful ultraviolet rays. Infratech knows that each patio is different and different patios require different heaters. Which is why Infratech and Outdoor Heater Store offer an array of Models to best suit your needs. This Average Coverage Area Grid can help you choose the best heater for your application.  State-of-the-art Digital solid state and analog controls are available up to 50 amps. Many other options are available including multiple zones, timers and non-contact infrared thermocouples.
Electric infrared heaters are remarkably efficient and cost effective. Over 90% of the input energy is converted directly to radiant heat. Infratube heaters focus that energy with pinpoint accuracy to the target area. Typical operating costs for the popular W3024 model is less than $0.30 per hour based on $0.10 per KW.
INFRATUBE'S parabolic reflector is made of a special corrosive resistant alloy, an important feature for humid climates or coast areas.
INFRATUBE quartz radiant heaters use infrared energy to efficiently provide heat with pinpoint accuracy virtually anywhere it's desired. And INFRATUBE is completely safe, emitting only warm radiant energy. Infratech W Series heaters are Underwriters Laboratories (UL) and Canadian Underwriters Laboratories (cUL) Listed under File E 29825. We are NZ/Australia and CE Listed under Wakefield Laboratories File NSW 21732. The W Series fixtures are also certified IP X4 rated.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Maximum efficiency
- Suitable heat for indoors and outdoors
- Provides spot heat to exposed areas
- Simple low cost installation
- Available in stainless steel or standard powder beige coated finish
- UL listed
- Optional Heat Regulator for desired heat control
- No moving parts, low maintenance
- One year factory warranty
- Electric Infrared Heaters are not affected by wind. No open flame burner
- No emissions produced, making it easy to install underneath canvas or wood
- Equipped with 6" Mounting Kit
- Electric Infrared Heaters can be flush mounted with special frames
- Minimal Maintenance Required
- Electric Heaters are energy efficient
- Low Operating Cost
|
|
|
|
|
|
|
|
| Check Out These Popular Accessories For This Product! |
|
|
|
|
